This solid-state tester is designed to completely diagnose lighting circuit problems commonly found with semi-trailers.
 | The auto mode cycles automatically through each light circuit checking for open or short circuit conditions. If the tester detects a problem, it will stop on the fault circuit and display the fault condition. |
| The operator can single cycle through each light circuit in the manual mode and dwell on a fault circuit to further diagnose and locate the exact cause of the problem. |
| Checks for cross shorts between circuits, shorts to ground, excessive circuit draw, or open circuit conditions. |
| Tests lighting circuits to meet all D.O.T. regulations. |
| Allows auto-cycling mode for monitoring light circuit operation or auto fault detection. |
| Circuit by-pass switches allow circuits to be skipped in the auto mode test. (Aids operator to detect open ground circuits or bypass non used auxiliary circuits). |
| Auto fault detection provides complete and quick diagnosis of your trailer’s wiring, saving time and money. |
| The tester is protected from all short circuit conditions. |
| Tester operates either from internal power supply powered from 120 V AC or from
remote 12 V DC battery. Note: this item may be limited in availability. |
Home | Up
| Products
Copyright © 1999-2005 RBE Electronics, Inc. - All Rights Reserved.